It is generally recommended, at least every 12 months, a thorough inspection of the device by the manufacturer, by a competent person authorized by the manufacturer or by a competent person according to the current national regulations on PPE inspection. Such inspection is mandatory only for devices for which it is indicated in the specific instructions. All documentation relating to the periodic inspection of PPE, available in this page and in the sheet of each product concerned, is addressed to the competent persons who deal with this activity. This documentation can also serve as a help to the end users, who are responsible for performing the inspection of their own devices before and after each use.

Climbing Technology documentation relating to the periodic inspection consists of:

• ● Periodic checking procedures > this page describes all operations necessary to correctly carry out the periodic inspection of a PPE.
• ● Device periodic check sheet > this sheet can be used to report the results of the inspection carried out on a single device.
• ● Periodic check sheet of devices kit > this sheet allows you to report the results of the inspection carried out on kit or assembly of PPE.

Before proceeding, carefully read the general warnings given at the following link:

• ● General remarks for periodic checking

The search can be carried out by product category or using the first 5 / 6 digits of the code that identifies the item concerned (e.g. 2C363, 4F709 etc.).