As a precautionary measure, Climbing Technology is voluntarily recalling its EASY SPEED (Ref. No. 2F714), subject to verification by the user. The recall is owing to a possible delay in the locking of the cam when used as follows:

In the picture, the user grabs the openable side plate squeezing it towards the locking cam. This pressure, even after removing the hand from the device, could lead to a delay in the locking onto the rope in the event of a fall.

As described in the user manual, the device can only be moved along the rope via the connector and cannot be gripped directly. This means that the method of use represented above is NOT allowed in any case. Nevertheless, in the interest of the safety of its customers, Climbing Technology has preferred to proceed with this precautionary recall.

---

1) BATCHES INVOLVED

This recall only concerns Easy Speed fall arrest devices identified with the following batch numbers:

• ● 0120
• ● 0220

Anyone in possession of a device marked with one of these two batch numbers must immediately stop using the device and return the product in accordance with the provisions set out below.

---

2) RETURN INSTRUCTIONS

Climbing Technology, a brand of Aludesign S.p.A.
Via Torchio 22, 24034 Cisano Bergamasco (BG) ITALIA
E-mail: recall@aludesign.it / commerciale@aludesign.it
Phone: +39 035 783595 – ext. 4 from Italy – ext. 5 from abroad

Please contact us to arrange the shipment, whose cost will be covered by us.

Please clearly indicate both on the package and inside it, your details (name and surname, address, e-mail, phone number). We need this information for the delivery of the replacement product.

Climbing Technology ensures the safety and quality of all its products. Your safety is our highest priority. We apologize for any inconvenience caused. The replacement product will be posted to you as soon as possible.