We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read



Reference number:

  • 2F713

Lightweight and easy to handle multifunctional device that can be used as:

  • fall arrester (EN 353-2:2002 / EN 12841:2006-A);
  • working line ascender (EN 12841:2006-B);
  • lanyard regulator (EN 358:1999).

Main characteristics:

  • sliding on the rope made easier by the shaped adjustment lever which is operated by the connector when pushed upwards during use;
  • equipped with a two-position adjustment wheel (Rest/Go) for the setup of the mode of use: in the Go position the device is free to slide along the rope and stops in case of a fall; in the Rest position the device can be manually locked above the user minimizing the potential fall factor.


  • EN 12841:2006-A/B – to be used with ropes EN 1891-A – 10.5 ≤ Ø ≤ 11 mm;
  • EN 353-2:2002 / EN 358:1999 – to be used with the rope PATRON PLUS 11 – Ø 11 mm.

Procedure and sheet for periodical check of this PPE

Technical features

68 x 84 mm

Working load:
100 kg


Standard and additional information

EN 353-2:2002

EN 358:1999

EN 12841:2006-A/B


Easy Move Kit

Easy Move Kit

Multifuctional fall arrester device, weightless and equipped with webbing sling, not removable, and terminal connector.

PATRON PLUS 11 with end loops

Patron Plus 11 with end loops

Rope PATRON PLUS 11 supplied cut to measure and with loops at both ends.