We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read



Reference number:

  • 7L929**FK

Adjustable, compact and easy to use positioning lanyard available in three different lenghts (2, 3 and 5 m) with terminal connector. It can be connected to the lateral attachment points (EN 358) of a full body harness, for climbing poles up or for positioning on pylons and it can also be connected to the ventral attachment point (EN 813) for positioning on inclined surfaces where there is no risk of a pendulum.

Main characteristics:

  • provided with an adjuster that allows the rope to slide smoothly without snatching and, when the rope is released, it promptly locks in position. It allows for easy recovery or release of the rope even under tension;
  • the cam has a large diameter and smooth surface that protects the rope from wear and tear and guarantees a long duration of the device;
  • safe and easy to use: the absence of protruding parts prevents any danger of release caused by accidental touching;
  • equipped with steel double gate connector and with a maximum gate opening of 50 mm.

Procedure and sheet for periodical check of this PPE

Technical features

Working load:
140 kg

Standard and additional information

EN 358:2018



Ref. No. Length Weight
7L92902FK 2 m 850 g
7L92903FK 3 m 930 g
7L92905FK 5 m 1090 g

Pillar SG

Light alloy oval-shaped carabiner with screwgate, designed for mountaineering, aid climb, big wall, speleology, and rescue operations