SAFETY ALERT

We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read

Archive

Description

Reference number:

  • 2P656

Combined anchor and pulley for evacuation from cable cars and chair lifts, it allows evacuation by allowing rescuers to be lowered along the cable, or when the underlying terrain permits it, to allow the unloaded pulley to run down the cable to the desired position and then use it as a winch and lower anchor.

Main characteristics:

  • for use on cables Ø 20 ÷ 60 mm max and inclination ± 50° max;
  • double gate opening for a higher safety during the use;
  • lightweight and well balanced, it can be used with only one hand;
  • high breaking strength thanks to the connector’s structure;
  • safety pulley in the centre that activates in case of extra load;
  • upper attachment point that allows to slide along the cable without any interference from the rope;
  • side ears allowing a wider control capacity on the cable.

Procedure and sheet for periodical check of this PPE

Technical features

Sizes:
390 x 260 mm

28 kN

Ø 20 ÷ 60 mm

1780

Standard and additional information

0333
EN 795:2012-B

0333
EN 12278:2007

13 1267
EN 1909:2004