SAFETY ALERT

We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read

Archive

Description

Reference number:

  • 7W912

Compact and lightweight fall arrest lanyards equipped with energy absorbers, high-elastic arms and SHELTER EVO terminal connectors (Ref. No. 2C37000 XXA).

Main characteristics:

  • elastic arms made with a reinforced band that enables a significant reduction of the encumbrance while using them and they elongate following the operator’s movement;
  • energy absorber protected in a zip-pocket;
  • equipped with light alloy double gate connectors and with a maximum gate opening of 21 mm;
  • compliant with the requirements of the VG11, CNB/P/11.074 for use with a fall factor 2 and use on sharp edges (r ≥ 0.5 mm);
  • available with elastic arms in two different lengths.

Procedure and sheet for periodical check of this PPE

Standard and additional information

EN 355:2002

0333

Tables

Model Ref. No. Length * Clearance height Weight
FLEX-ABS SHELTER Y-S 7W912105 105 cm 5,25 m 595 g
FLEX-ABS SHELTER Y-L 7W912165 165 cm 5,85 m 655 g

* Product length including karabiner providing connection to the harness, karabiners at the lanyards terminations and fully extended tails. Conventional length of karabiners (when not present): 10 cm.

FLEX-ABS

FLEX-ABS

Compact shock absorber protected in a zip-pocket and provided with reinforced eyelets.

Shelter Evo

SHELTER EVO

Double gate connector, ideal for use as terminal and directional connector for lanyard and it is also indicated for use with slings.