SAFETY ALERT

We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read

Archive

Description

Reference number:

  • 2D66400

Self-braking descender for rope work, the evolution of the SPARROW 200 descender has been developed for high workloads. It allows the operator to lower themselves on the working line, to position themselves on the working line and to ascend the same rope. It is ideal in the event of assisted lowering of two people with the device installed at the anchor (the operator lowers the rescuer and the person being rescued) or for simultaneous lowering of two people (rescuer lowers themselves with the injured person).

Field of application:

  • rescue descender certified to EN 341:2011-2A, work load limit 200 kg with a maximum descent height of 180 m, only to be used with the TEC STATIC PRO rope – Ø 11 mm;
  • rope adjustment/ descender device certified to EN 12841:2006-C, work load limit 210 kg, only to be used with EN 1891 type A – Ø 11 mm ropes.

Main characteristics:

  • equipped with a breaking spur that creates additional friction on the rope, when used during the descent, without the use of an additional connector. The shape of the braking spur has been improved in order to have an even more effective control of the rope;
  • a multifunctional command lever with an automatic recall system that allows the operator to descend at a controlled speed and stop the descent at the desired point without the need to tie off the device;
  • an EBS safety system (Extraordinary Braking System) that is activated if the lever is accidentally fully opened, reducing the speed of descent instead of increasing it;
  • equipped with a safety lever on the movable flange that facilitates the insertion of the rope in the transition of the fractionations.
#ee9900
orange (2D66400 WB5)
#111111
black (2D66400 XZ0)

Procedure and sheet for periodical check of this PPE

Technical features

Sizes:
87 x 179 mm

Ø 11 mm

529

Standard and additional information

EN 341:2001-2A
WLL 200 kg

EN 12841:2006-C
WLL 210 kg

0333

TEC STATIC PRO with end loops

TEC Static PRO with end loops

TEC STATIC PRO rope supplied cut to measure and with loops at both ends and stitching with strenght 22 kN.

Rescue Kit 200R

Rescue Kit 200R

Emergency kit suitable for various types of work at height, for a maximum load of 200 kg. Particularly suitable for rescue operations with two people descending down a rope.

Rescue Kit Rod 200R

Rescue Kit Rod 200R

Multifunctional rescue kit for work at height suitable for loads of up to 200 kg and can be used in two main modes: indirect or direct rescue.

QUICK ROLL

Quick Roll

Innovative ascender handle with integrated pulley to be used together with auto-blocking descender (es. SPARROW). Much more effective and less clumsy than the traditional ascending handles.