SAFETY ALERT

We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read

Archive

Description

Reference number:

  • 2C3860L XPE

Large HMS carabiner with wide opening and triplex twist-lock gate, made of hot-forged light alloy, designed for use in mountaineering, recovery manoeuvres and rescue operations.

Main characteristics:

  • shape guarantees correct axial loading relative to rope and other devices;
  • large size and ample width to allow use of Munter hitch knot, the securing of more than one rope, slings or devices and rope manoeuvres in general;
  • accentuated double-T profile, for an excellent weight/load ratio;
  • lightened and shaped form for improved ease of holding;
  • catch-free closure to avoid accidental tangling during use;
  • with ACL system, which allows attachment to the harness’s belay loop, preventing cross loading.
#d1d1d1 #eaeaea #81d742
grey / silver gate / green sleeve

Procedure and sheet for periodical check of this PPE

Technical features

Sizes:
121 x 82 mm

25 kN

8 kN

7 kN

87

23 mm

Standard and additional information

EN 12275:2013-H

EN 362:2004-A/T

0333

DUAL

DUAL

Light alloy double pulley developed for the re-direction of two ropes during work manoeuvers.