SAFETY ALERT

We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read

Archive

Description

Reference number:

  • 2K645

Click Up | UKC - best in test

 

Following the natural trend of the companies to produce thinner and lighter EN 892 dynamic ropes, we decided to update the marking of our belay device CLICK UP. Several internal tests proved that CLICK UP works perfectly with single ropes Ø 8.6 mm. No modification has been carried out on the device, therefore all the CLICK UP already existing and sold can be used with single ropes from 8.6 to 10.5 mm.

CLICK UP is an innovative belay device developed for sport climbing. It is simple to use and its innovative design has safety features that prevent mistakes. Easy to use, intuitive and safe, it is extremely lightweight and compact.

Main characteristics:

  • it allows you to quickly and fluidly feed rope without jamming;
  • it allows to arrest a fall simply by pull down the free hand of the rope;
  • it operates without the need to act on levers and moving parts;
  • especially suitable for beginners and children because intuitive and error-proof.

Total use safety! The final, but most fundamental feature, is in the case of incorrect use. Should the device be used incorrectly, CLICK UP continues to allow you to break and lower your partner in complete safety, thanks to the V-shaped braking notches present. This is the most appreciated feature, as it avoids several mistakes that can happen during the use of belay devices while climbing, both indoors or outdoors. It makes CLICK UP the right belay device for rock climbing schools and climbing gyms.

CLICK UP is supplied and must be used with the proper CONCEPT SGL HC, carabiner with hard-coated wear-proof anodization and ACL system that prevents the possibility of the cross loading.
Patented and entirely produced in Italy.

#ee9900
orange (2K645BWESYC)
#81d742
green (2K645BSLSYD)

Technical features

Ø 8,6 ÷ 10,5 mm

115
(only device)

Standard and additional information

Conform to:
EN 15151-2:2012 type 2

Concept SGL HC

Concept SGL HC

Hot-forged light alloy HMS carabiner with screwgate, ACL system to prevent cross loading and special wear-proof hard coat anodizing, ideal for intensive and prolonged use.