SAFETY ALERT

We have been reported about a few rare cases of plastic bindings that have broken unexpectedly. Front binding (toe side) and / or rear binding (heel side). Such breakage irreparably affects the normal and proper use of the “CRAMPON”. The evidence of an even slight risk of breakage of the bindings makes the device itself unsuitable for use. >> read

Archive

Description

Reference number:

  • 4A222
  • 4A223

Belay station entirely made of AISI 316L stainless steel.

It is composed of two glue-in anchors of Ø 12×75 mm (Ø 14 mm drilling hole, 85 mm drilling depth) connected by a linking chain and a ring, with a screwgate carabiner (Ref No. 4A222).

Also available with glue-in anchors of ø 12×105 mm (Ref. No. 4A223).

Technical features

25 kN

25 kN

Drilling Ø:
14 mm

Standard and additional information

Conforms to:
EN 959:2007

Tables

Ref. No. Drilling depth
4A222 85 mm
4A223 115 mm